How to Make Wine From Kits

How To Make Wine From Kits

Making a wine kit from one our Master Vintner, RJS Craft Winemaking, or Winexpert kits is simple and easy because the kit has all the ingredients in pre-measured amounts that one needs to make 6 gallons of wine (approx. 28-30 bottles). Some of the ingredients you’ll encounter, and their function are listed below:

  1. Juice Bag: The grape juice has all the fermentable sugars that the yeast feed on to make alcohol. The vast majority of the wine’s flavor and complexity is also derived from the grape juice.

  2. Wine Yeast: 1-2 Yeast packets depending on the kit. Yeast is what eats and converts the sugars to alcohol.

  3. Oak: In select kits you will find packets of oak. Oak will impart beneficial flavors and colors into the wine. Oak also helps to balance some of the rich flavors found in wines like chardonnays.

  4. Bentonite: This is a fine clay in powder form that helps clarify the wine during fermentation (not every kit includes Bentonite).

  5. Metabisulfite: Stops yeast action and is used in stabilizing the wine before clarifying. Metabisulfite can also be used as a sanitizer for winemaking equipment in higher concentrations, however, your kit will not include enough for use as a sanitizer.

  6. Potassium Sorbate: Stops all remaining fermentation action and fully stabilizes the wine. Sorbate is used in conjunction with metabisulfite for wine stabilization.

  7. Finishing Fining Agent: Depending on the kit, this will be either an isinglass pack or chitosan pack. Like bentonite, these agents help clarify the wine into the sparkling beauty you sip from your glass.

Additionally, very clear step by step instructions are included with every kit. Anyone can make a great wine using the wine recipe kits at AHS if they are willing to follow instructions and exercise a little patience. I know that last bit is hard, I never wait to taste my fermentables before they’re finished, but it's worth the wait.

Instructions for Winexpert 4 - 8 week wine kits

Step 1: Day 1 Primary Fermentation

1.1 Clean and sanitize equipment to be used.

1.2 Pour 1 L (4 cups) of hot tap water into bottom of the primary fermenter and stir in: packet #2 Bentonite. Mix well.

1.3 Pour contents of the juice base bag into the primary fermenter. if there are two bags, use the larger one now. The reserve (small bag) is not added at this step.

1.4 Top primary fermenter up to 23 L mark with good quality drinking water.

1.5 If your kit contains oak chips or granular oak, stir in now. if your kit contains oak cubes, they will be added at a later stage.

1.6 Stir well. use a hydrometer to measure and record the day 1 Specific gravity (S.g.) in the chart provided in the instructions.

1.7 Sprinkle dry yeast on top of juice base (if your kit contains two packages of yeast, add both now).

1.8 Place loose fitting lid, or primary lid with airlock filled halfway with sulphite solution on primary fermenter.

1.9 Keep fermentation area warm (20°C to 25°C or 68°F to 77°F) for the entire winemaking process.

Step 2: Day 14 Primary Fermentation

2.1 Check chart for required S.g. reading. Measure the S.g. if wine is not in range, check different stages of the fermentation process. again in 48 hours. if in range, record the number.

2.2 Using sanitized equipment carefully syphon (rack) wine into a clean/sanitized carboy leaving sediment behind.

2.3 Add contents of packages #3 potassium Metabisulphite and #4 potassium sorbate directly into the carboy of wine.

2.4 Agitate wine using a sterilized stirring spoon. Stir wine, changing direction intermittently for 10 minutes. Alternately, wine can be degassed using a drill with degassing attachment for 2-4 minutes at medium speed reversing direction every 30 seconds.

2.5 Stir in package #5 kieselsol. If your kit contains two, add one package now. The other will be added at a later stage.

2.6 Fit airlock filled halfway with sulphite solution into the neck of the carboy and leave for 24 hours.

Step 3: Day 15 Clearing

Length Of Time To Make Wine Minimum Total Clearing Days
8 Weeks 41
6 Weeks 27
5 Weeks 20
4 Weeks 14

 

3.1 Stir the contents of the reserve into the carboy, if included.

3.2 Stir in package #6 chitosan(s).

3.3 If your kit contains a second #5 kieselsol, stir in one hour after Chitosan addition.

3.4 If your kit contains oak cubes, stir them in now.

3.5 Replace airlock and leave wine to sit in a warm (20°C to 25°C or 68°F to 77°F), undisturbed area away from direct heat and light.

3.6 After 5 days, give the carboy a twist (without lifting) to allow any sediment stuck to the walls of the carboy to drop.

3.7 Continue clearing process according to cart above.

Step 4: Day 26-54 Polishing Rack / Aging

4.1 wine should be perfectly clear. if not, leave wine another 7-14 days to finish clearing.

4.2 Carefully rack wine off of sediment (and oak cubes if present) into a clean and sanitized carboy fitted with a solid bung.

Optional Steps: a) if aging your wine longer than 3 months, add 1.5g (1/4 tsp) of potassium metabisulphite to the wine at this time to help preserve flavor and color.

b) if filtering wine, do so at this stage. Neverr Filter cloudy Wine.

4.3 Leave wine to sit undisturbed a minimum of 2 days to allow settling.
 

Step 5: Bottling 

5.1 Carefully syphon your wine into clean and sanitized bottles.
5.2 Cork bottles and leave upright for 3-5 days allowing cork to expand. invert or store on side to keep cork moist.
Store wine at 11°C to 18°C or 52°F to 65°F

If you're still not convinced of how easy it is to make your own wine, then check out our video below

Wine kits do not take a long time to get into the bottle. It is in fact more than possible to have a wine in bottle at 4-6 weeks from start. However, the catch that you’re looking for comes in the form of aging the wine. There are benefits to aging and following the recommended guidelines ensure your wine will always be delectable and desired by your friends. But, a remarkable amount of the improvement can be obtained within the first 1-2 months of bottling and as such it is possible for you to have a delicious wine within 3 months of starting. Packaged wine making juices tend to make wines faster than making wine using fresh fruit juices because there is generally no pulp or skins involved (with some very specific exceptions). That being said Wine Expert has some very specific aging recommendations from which you can get the best possible flavor.

  1. Island Mist: Island mist kits are fermented from a grape base and sweetened with a fruit juice. These wines are ready within just a few weeks of bottling.

  2. Limited Edition Apres Dessert Wines: These kits can vary depending on the type of wine being made. A standard dessert wine could be ready with as little as 2-3 months age time, whereas a chocolate raspberry port may take 4-6 months.

  3. Winexpert Kits: It is recommended that these wines age from 2-5 months after bottling. The aging process allows tannins and other flavors to mellow meld into one another so as to be pleasing to the pallet. The difference between the two kits are that World Vineyard kits have juice that is sourced from specific regions (i.e. Chilean Merlot, Spanish Tempranillo), whereas the Vintners Reserve will source right type of grape, not necessarily by a particular region.

  4. 1 Gallon Winexpert kits: Have all the same requirements for fermentation and aging as a 6 gallon world vineyard kit.

  5. Winexpert Reserve Kits: Wine Expert strongly recommend that these wines be aged up to a year in order to enjoy the best possible flavors. While they will be ready to drink in as little as 3-4 months, they will be best at 12 months or more. This has to do with the quality of the juices in the juice bag. Selection kits are a step above the rest in that they rely on purer grape juices that are sourced and/or blended from very specific locales within a given region. The quantity of juice is also more than what will be found in a World Vineyard or Vintners Reserve Kit, meaning less water will be used, which results in a longer age time.

  6. Private Reserve Kits and Limited Edition Kits: These kits are the highest quality wine kits produced on the market, bar none. They will take 16-18 months age time to achieve the best results. Eclipse kits include the most pure juice of any level kit and the highest quality ingredients. The grapes used in these kits are often sourced from specific vineyards.

I know it’s hard to age a wine for this long, especially when you’ve put the time and effort and money into making a Selection or Eclipse Kit. I’m not saying you can’t start to drink the fruits of your labor at 3-4 months, it will be a very good wine, but at 12-18 months it will be a phenomenal wine. I recommend saving 1/4 to 1/2 your batch bottles and then start a new batch. This way you can enjoy your wine at its best, but you can start to enjoy it as it's maturing.

In addition to a wine making recipe kit and being prepared to age it, you will need a wine making equipment kit and wine bottles in order to make your nectar of the gods. We offer several levels of kits to get you started. Or if you’re a brewer of beer already, all you need to do is get an additional 7.9 gallon fermenter, corker, corks and a 6 gallon carboy.


How to homebrewWinemaking

Recent Articles

How to Make Hard Cider

How to Make Hard Cider

Compared to homebrewing beer, making hard cider at home is a much easier process. Since there’s no mash and no boil, it can be less labor intensive as well. Plus, you’ll be able to use the equipment you have on hand already, so why not give making hard cider a try?
How to Clean & Store an Oak Barrel

How to Clean & Store an Oak Barrel

It is advisable to avoid using barrels that have developed mold inside. When opting for barrels, investing in a new French or American oak barrel is a wise choice. Alternatively, if a used barrel is to be used, it should be thoroughly cleaned beforehand.
Aging Wine With Oak Chips

Aging Wine With Oak Chips

For centuries, the practice of aging red wines in oak casks has been recognized as far superior in enhancing their flavor and character compared to aging them solely in glass or plastic. French winemakers, who have employed this technique for generations, have produced wines of extraordinary complexity and taste as a result.